The AA 3300 X water cooler has been hugely popular for a long time since it's conception and for many different reasons. It is tough, simple to use and is very reliable. Even though this water cooler first appeared a few years ago it does not look 'dated'.
The design is well proven and is available as a floor standing or table top water cooler. The floor standing model is typically taller than other floor standing coolers and the manual dispensing taps are at a more ergonomic height.
The 3300 X cooler taps are of the reliable manual type. Very simple, tough, efficient and easy to use. This cooler is particularly suitable for tougher environments such as schools, colleges, busy public areas and factories. The chilled and hot water cooler version has a safety lock fitted to the hot dispense tap.
The cooler has a removable spring loaded lower front panel. This gives easy access to the filter system compartment. This is great for regular service work. We can supply water filters for these coolers. Type required will depend on your local water quality.
The floor standing 3300 X cooler has an intergral cup holder which avoids the needs for unsightly add ons. This can take either 7 and 9oz plastic cups.
We can also supply this water cooler with SIP Automatic 24/7 Ozone Sanitising with sleep mode. This enables the cooler to not only self sanitise every night but the sleep mode can save energy and costs on top. The SIP unit has to be factory fitted.
The 3300 X water cooler has a full length cowling option available - this will satisfy BREEAM and will fit the cooler securely to a wall and can be supplied separately.
The drip tray is designed to be a simple lift out type but to comply with BREEAM this can be easily adapted to connect to mains waste drainage. This has to be factory installed.
It is also possible to connect the drip tray to an alarmed Drip Tray Over Flow system. This can be factory fitted or self installed.
Each 3300 X water cooler is correct for 220 - 240 V, 50Hz supply. Provided with a 3 pin plug and 180cm length power cord.
This water cooler can also be offered with a conversion kit as a bottled cooler.
The 3300 X refrigeration system comprises of a quiet, air cooled static type condenser. No fan is required. This is protected against motor overload. Each unit is hermetically sealed and uses 134a refigerant.
The cooling system is thermostatically controlled to 4C - 12º C. This unit is not a direct chill type and has a stainless steel 3 litre cold water tank.
The hot version has a 2 litre stainless steel tank. Thermostatically controlled to between 87 and 92º C. These coolers are not as hot as a 'stand alone' hot drinks boiler but are suitable for a small number of users where boiling hot water is not required. Easily accessible hot water drain tank at the back of cooler to aid service calls.
Dimensions of the floor standing POU (plumbed in) 3300 x water cooler is Height 1135 mm Width 340 mm Depth 340 mm Weight 18 Kg
Dimensions of the table top POU (plumbed in) 3300 x water cooler is Height 460 mm Width 340 mm Depth 340 mm Weight 15 Kg
To aid security on the 3300 X water cooler simple low cost wall securing brackets are available.
Great for high use and tough environments where heavy use is expected. Because this water cooler can be protected with SIP Automatic 24/7 Ozone Sanitising it is perfect for health care establishments. The SIP system also is equiped with sleep mode for reduced energy consumption.
This water cooler is WRAS approved and meets the environmental standard of RoHS (Restriction of Hazardous Substances) has years of proven reliability behind it. It is available in Anthracite livery with a back lit logo panel. It requires minimal servicing and offers high reliability.
Check out and compare the AA 3300 X with other coolers in our range by following this simple link...
Alternatively use our simple Contact Us form to ask for more details or free trial of this outstanding water dispenser.